New mobile phones launched without exception all use the USB Type-C Interface, and Type c connectors tend to rule the world. Regarding the USB Type-C interface, manufacturers have unanimously promoted that it can be inserted in both positive and negative poles, and there is no need to worry about it being inserted again. So, is this enough to make USB cable assemblers choose Type-C interface? What other advantages of Type-C can make mobile phones better?
For USB Type-C, USB 3.0 must be mentioned. This is a new interface specification initiated by Intel and other companies. The biggest feature is that the transmission bandwidth is up to 5.0Gbps, and the type interface is here. New interface used under the new specification. In 2013, the USB 3.0 promotion team officially announced the rendering of the next-generation USB Type-C connector, and mass production began in August 2014. In fact, Type-C is still a very novel interface. In the past, it has been in the brewing stage. It is now in an explosive period.
USB3.0 and Type-C are two different concepts and should not be confused. In short, from the perspective of communication methods, USB3.0 is a protocol standard, and from the perspective of mechanical and hardware design, Type-C is an interface standard. Even without Type-C, there will be other interfaces that support USB3.0. Type-C can support both USB3.0 and USB2.0.
In fact, in addition to being able to insert positive and negative electrodes, USB Type-C also has many advantages. It is the next generation product of the universal micro USB interface for mobile phones. It has been greatly improved in appearance and transmission speed. Specifically, the advantages of USB Type-C mainly include the following aspects:
1.The maximum transmission rate of Type-C can reach 10Gb per second. Compared with the previous generation of micro USB, the transmission speed has been greatly improved
2. The C-type standard specification cable can pass 3A current, which can achieve the effect of fast charging. In the future, fast charging may become the standard for mobile phones.
3. The size of the socket end of the Type-C interface is about 8.3mm×2.5mm, which can save some design space for mobile phones and facilitate the manufacture of thinner and thinner mobile phones.
If you have any requirements, please contact the Connectors Type C Supplier